과학기자재전시실 | 견적의뢰 | 미등재상품상담 | 수출입 및 제조상담 | 실험상담 | 협력업체문의
Microwave Furnaces by EPL Ceramic Materials LLC
 

 
  →  상품상세정보  

 

ThermWave 1.3 Microwave Furance

The ThermWave 1.3 Microwave Furnace was designed by Dr. Larry A Wolfe Ph.D. and Eugune Lunghofer in the 1990's in an effort to acheive high temperatures in short periods of time, while keeping costs down. The ThermWave 1.3 can reach temperatures of 1500ºC in less than half an hour. The same furnace is used at NASA, LSU and Rutgers University.

The ThermWave 1.3 Microwave Furnace is made to be operated on 120 Volts AC. A transformer must be used to step the voltage from 240 Volts AC to 120 Volts AC. If you have any doubts and/or are unsure about the required Voltage in your country to operate the ThermWave 1.3, contact a certified electrician.

EPL Ceramic Materials LLC will supply you with a step-down transformer if you request. However, the price of shipping a transformer overseas is ten times more expensive than the purchase price of the transformer.

  • Heat to 1500 °C in Less Than 30 Minutes
  • Precise Temp. Control Above 500 °C
  • Not Recommended for Use Below 450 °C
  • Comes With Controller Uint
  • Variable Power Output and Precise Temp. Control
  • Can Easily fit on a Countertop
  • Thermocouple Sold Separately

EPL Ceramic Materials LLC Thermwave 1.3 Microwave Furnace Specifications
Power Requirement 120V; 60Hz
Plug NEMA 5-15
Output Power 1.25 KW, 18 Amp
Dimensions Out: 23.75in Dx18" W 14" H in 18" D x 17" W x 10.25" H
Frequency 2.45 GHz
Temp Range Temperatures up to 1750 °C can be Obtained
Cooling Water

 

ThermWave 2.0 Microwave Furnace


  • For Even Quicker Heating!
  • Working volume of 2,600 in 42.6 L
  • Swing Door and lit Interior
  • Inert or Ambient Atmosphere Purge
EPL Ceramic Materials LLC ThermWave 2.0 Microwave Furnace Specifications
Power Requirement 240 V 50/60 Hz
Plug NEMA 6-30 R
Output Power 2.1 KW 20 A
Dimensions Out: 20.75" D X 25.75" W 18.625 in H in 13" D X 21" W X 9.825"H
Frequency 2.45 Hz
Temp Range Temperatures up to 1750 °C can be Obtained
Cooling Air, Connection for Fume-Hood Vent Line
 

Microwave Furnace Susceptors

                            by EPL Ceramic Materials LLC




  • Fast, Controllable and Reproducible Heating
  • Converts Microwave Energy to Radiant Heat
  • Supplement Volumetric Heating for non-Suscepting Materials
  • Avoids Inverse Temperature Profile for Suscepting Materials
  • Proprietary Silicon Carbide Composite Susceptors

Susceptors absorb microwave energy at low temperatures when the sample may or may not absorb microwave energy.

In a very small space the susceptors may absorb a tremendous amount of energy and require a reduction in size. In larger thermal boxes, it may be necessary to increase the size and/or amount of susceptors

 
 
Item No. Descript-xion Temperature Rating
SiC-20 Thermcept - 20 g Silicon Carbide Susceptor 1500 º C
SiC-50 Thermcept - 50 g Silicon Carbide Susceptor 1500 º C
SiC-50-J Thermcept - 50 g Silicon Carbide Susceptor (Squat) 1500 º C
SiC-70 Thermcept - 70 g Silicon Carbide Susceptor 1500 º C
 

Microwave Furnace Thermal Pods

 


Option 1 1500 °C Thermal Pod Item No. Descript-xion Size Temp Rating
  TP-1411 Shell #1 10" OD, 8" ID, 6" H 1500 °C
    Top #1 10" D, 2" H 1500 °C
    Bottom #1 10" D, 2" H 1500 °C
    Insert #1 8" D, 1" H 1500 °C

Option 2 1500 °C Thermal Pod Item No. Descript-xion Size Temp Rating
  TP-1412 Shell #2 7.7" OD, 5.7" ID, 4.0" H 1500 °C
    Top #2 8" D, 2" H 1500 °C
    Bottom #2 8" D, 2" H 1500 °C
    Insert #2 5.7" D, 1" H 1500 °C

Option 3 1500 °C Thermal Pod Item No. Descript-xion Size Temp Rating
  TP-1413 Shell #3 5.25"OD, 3.25" ID, 4.5" H 1500 °C
    Top #3 5.25" D, 2" H 1500 °C
    Bottom #3 5.25" D, 2" H 1500 °C
    Insert #3 3.25" D, 1" H 1500 °C

Option 4 1500 °C Thermal Pod Item No. Descript-xion Size Temp Rating
  TP-1414 Shell #1 10" OD, 8" ID, 6" H 1500 °C
    Shell #2 7.7" OD, 5.7" ID, 4.0" H 1500 °C
    Top #1 10" D, 2" H 1500 °C
    Bottom #1 10" D, 2" H 1500 °C
    Insert #1 8" D, 1" H 1500 °C
    Insert #2 5.7" D, 1" 1500 °C

Option 5 1500 °C Thermal Pod Item No. Descript-xion Size Temp Rating
  TP-1415 Shell #2 7.7" OD, 5.7" ID, 4.0" H 1500 °C
    Shell #3 5.25"OD, 3.25" ID, 4.5" H 1500 °C
    Top #1 10" D, 2" H 1500 °C
    Bottom #1 10" D, 2" H 1500 °C
    Insert #2 5.7" D, 1" H 1500 °C
    Insert #3 3.2" D, 1" H 1500 °C

Additional Inserts

TPI-141 Insert #1 8" D, 1" H 1500 °C
TPI-142 Insert #2 5.7" D, 1" H 1500 °C
TPI-143 Insert #3 3.2" D, 1" H 1500 °C


Option 6 1700 °C Thermal Pod Item No. Descript-xion Size Temp Rating
  TP-1400-01 Shell #1 10" OD, 8" ID, 6" H 1400 °C
  TP-1700-02 Shell #2 7.7" OD, 5.7" ID, 4.0" H 1600 °C
  TP-1700-TI1 Top #1H w/ Insert Top: 10" D, 2" H 1400 °C
  TPI-172 Insert: 5.7" D, 1" H 1700 °C
  TP-1700-BI1 Bottom# 1H w/ Insert Bottom: 10" D, 2" H 1400 °C
  TPI-172   Insert: 5.7" D, 1" H 1700 °C
  TPI-172 Additional Insert 5.7" D, 1" H 1700 °C
Additional Options        
  TP-1700-03 Shell #3H 5.25"OD, 3.25" ID, 4.5" H 1700 °C
  TP-1700-T2
Top #2H
8" D, 2" H
1700 °C
  TP-1700-B2 Bottom #2H 8" D, 2" H 1700 °C
  TP-1700-04 Shell #4H 3" OD, 2"ID, 4" H 1700 °C
  TP-1700-T3 Top #3H 5.25" D, 2" H 1700 °C
  TP-1700-B3 Bottom #3H 5.25" D, 2" H 1700 °C

Microwave Furnaces by EPL Ceramic Materials LLC

EPL Ceramic Materials LLC is a leader in the field of microwave furnace technology. EPL Ceramic Materials LLC is the manufacturer and distributor of the World Famous ThermWave Microwave Furnace, used in laboratories and research facilities, such as NASA and Rutgers University.

 

 
 

Developed by Eugene Lunghofer and Dr. Larry Wolfe Ph.D., The ThermWave Microwave Furnace was designed to be a low-cost alternative for research and development.

A typical Thermwave Microwave Furnace package consists of a ThermWave Microwave Furnace, thermocouple, refractory package and susceptors.

All ThermWave Microwave Furnaces are custom-built in the laboratories of EPL Ceramic Materials LLC in Youngstown New York.

If you are looking for faster firing times, shorter dwell times or lower firing temperatures along with increased energy efficiency, then a ThermWave Microwave Furnace is what you need!

EPL Ceramic Materials LLC offers two distinct Microwave Furnaces. The ThermWave 1.3 Microwave Furnace is an entry-level Microwave Furnace, great for research and development. The next step up is the ThermWave 2.0 Microwave Furnace.

Aside from Microwave Furnaces, EPL Ceramic Materials LLC sells a wide variety of products used in microwave sintering, such as thermocouples, microwave susceptors, thermal pods, thermal boxes. EPL is also available for Ceramic Industry Consulting.